|
Products
Features
|
| [1] |
Water-based paint
with strong heat insulation property and hollow
micro spheres that can reflect solar energy |
| [2] |
strong flexibility
in low temperature |
| [3] |
excellent adhesion
on various materials |
| [4] |
waterproof, no
leakage from the roof |
| [5] |
soundproof |
| [6] |
low specific gravity
with large volume per unit |
| [7] |
Easily handling |
| [8] |
Aqueous, washable
and convenient to operate |
| [9] |
Environment friendly |
| [10] |
Long use life without
stiffening, cracking or pulverizing, but also free
from ultraviolet radiation |
|
Application
Range
|
| Locations
and buildings that needs to resist heat and noise. |
|
Technology
Exponents
|
| Components：various
acrylic water-based resin |
| Heatproof
materials：hollow micro sphere material and other
special fillings |
| Solid
Volume：40±0.02% |
| Specific
Gravity：0.95±0.02 |
| Colors：white
or colors specified。 |
| Gloss：Matt |
| Re-coated
time：over 12 hours |
|
Application
Method
|
| [1] |
Surface preparation:
polish and flatten the surface to get rid of dust,
grease and dirt, etc |
| [2] |
Apply the Primer： |
| |
① Cement surface:
Keep a completely dry surface with PH < 10 and then
apply special heatproof primer to strengthen adhesion
and seal up the alkaline matters. |
| |
② Metal surface：Apply
one coat of anti-rust primer. |
| [3] |
pply heatproof
middle coating: brush and roller as recommended |
| [4] |
Apply top coating：either
brush, roller or spray |
|
Theoretical
Coverage
|
| Primer：
6?8m2/L for 0.05?0.1mm per coat |
| Heatproof
middle coating：2?3m2/L, two coats for exterior wall
and roof |
| Protective
top coating：理論用量爲每公升1.5～3平方。 |
| Protecting
finishing coat：15?25m2/L /coat |
| Practical
consumption depends on the roughness of the surface |
|
Notice
|
| [1] |
Temperature：avoid
handling if average temperature is lower than 10℃
or too high |
| [2] |
Recoat intervals：over
12 hours at least to maintain a completely dry film. |
| [3] |
Make sure the water
amount lower than 15% as solvent to keep an excellent
product performance |
| [4] |
Stir it well before
applying in order to ensure good quality |
| [5] |
Avoid operating
in raining days or 12 hours before raining |
