|
Product
Features
|
| [1] |
Supreme
adhesion, excellent bonding strength, splendid softness,
transparency and bubble free |
| [2] |
Free
from weathering, convenient to operate in short
time period and high productivity |
| [3] |
To
use this product is to ensure high performance of
safety and cohesion |
| [4] |
Colored
Safety Lamination Glass can be formed by adding
special effect pigments |
| [5] |
Naturally
dry |
|
Application
Range
|
| It
is widely applied in any environment or places that
needs safely improving |
|
Technology
exponents
|
| Components：Elastic
Epoxy Resin |
| Volume
Solids：99% |
| Color：transparent |
| Operable
time：50mins(25℃，0.2%hardener) |
| Drying
time：12 hours |
|
Application
Method
|
| Perfusing |
|
Theoretical
Coverage
|
| 1.4㎡/kg
while thickness of the lamination is 1mm |
|
Mixing
Ratio
|
| Resin∶Additive∶Hardener＝100∶0～0.4∶0.2～0.4(4000g∶0～16g∶8g～16g)
(by weight) |
|
Mixing
Method
|
| Mix
Base Resin with Additives (mixing ratio as above)
and then stir it well. Then add Hardener to the
mixture by the above mixing ratio Start applying
after 3 to 5minutes when bubbles are gone. |
|
Application
Procedure
|
| [1] |
Clean
the glass surface with SW Cleaning Agent。 |
| [2] |
Seal
up the edges of the glass by tape, leaving an opening.
When the glass surface is dry, clamp the edges well
by applying suitable tools to protect air or lamination
leakage |
| [3] |
Perfuse
enough SW Safety Lamination Glass Resin whose container
must be cleaned |
| [4] |
In
order to expel bubbles from the lamination, do set
the laminated glasses slantwise. Seal up the perfusing
opening while there is no bubble in the lamination.
|
| [5] |
Drying
time: 8 to 12 hours naturally |
| [6] |
Clean
the glass surface at last with SW Cleaning Agent |
|
Notice
|
| [1] |
Do
follow the application procedure as above |
| [2] |
Adjust
suitable amount of additives before perfusing in
order to control the hardening time |
| [3] |
Ensure
a clean glass surface before laminating and seal
up the glass edges after application, or the lamination
gets bad. |
| [4] |
Clean
all equipments with clean water immediately after
use |
| [5] |
Store
in a cool and ventilated place. Protect from exposure
to sunlight or freezing |
|
Packaging
|
| Base
Agent4L/can, Additives: 1L/can |
|
Shelf
Life
|
| Six
months |
