products-building coatings-Interior & exterior wall paint series-fineline alkali resisting wall sealer(SW-808)

>Building coatings

Interior & exterior wall paint series

Fineline alkali resisting wall sealer(SW-808)

> Product feature：

[1]	Made from imported special latex, filling and additives
[2]	Special formulation to promote alga-proofing function
[3]	Strong anti-infiltration &anti-alkali function

> Application range：

Apply to cement, plaster, gypsum building, interior & exterior alkalic surface

> Technical exponent：

resin composition: acrylic latex:	Acrylic latex
solid volume::	≥50℅
proportion(Kg/L, 25℃):	1.35±0.02
drying time:	1 hour for touch dry (25℃)
recoating time:	about 2 hours (25℃)
color:	White

> Surface preparation：

For newly painted surface:	leave enough time to keep surfaces fully clean, dry and firm, the water content must be less than 10%
For previously paints surface:	previous paint finish should be removed and then surfaces should be thoroughly rubbed down using a suitable abrasive paper and then dusted off. And fill any surface imperfections with mixtures of chalk.
For moldy surface:	remove the mould, rub down the surface with abrasive paper, clean with decolourant and then wash with clean water. The surface must be dry before use.

> Application method：

Roller, brush, conventional spray

> Theoretical coverage：

12~14m2/L/coat, practically depends on roughness of the wall

> Thinning ratio：

Thin with 10~20% of clean water. Stir well before use

> Application environment：

Temperature: 5℃~40℃ maximum relative humidity: 85%

> Notice：

[1]	Rinse immediately with plenty of water or seek medical advice in case of any contact with eyes. Use soap and water to remove splashes from skin.
[2]	Stir well before use
[3]	Please ensure good ventilation during application
[4]	Clean all equipment with clean water immediately after
[5]	Store in a cool and ventilated place. Protect from exposure to sunlight or freezing

> Shelf life：

30 months