products-industrial coatings-metal paint

>Industrial coatings

Metal Paint

> Product introduction：

Applicable to various metal, iron & steel, hardware, aluminum and alloy to provide excellent decorative & protective coating and promote the taste of the product. It has outstanding mechanical and chemical properties. The coating is fresh in appearance, firm, smooth, bright, strongly cohesive and acid, alkali & corrosion resisting.

> Application range：

Resurface and repair old surface, form a corrosion insulating primer and top coating for car, household appliance, light industrial plating product, hardware apparatus, building alloy, door & window made of aluminum alloy, various metal artwork

> Application method：

[1]	mix anti-rust primer and primer hardener by 4:1 with proper solvent for metal paint (less than 1/4)
[2]	mix lustre metal paint/luster metal paint (transparent) and paint hardener by 4:2 with proper solvent for metal paint (less than 1/4), the spray the mixture on a dry surface coated by primer.
[3]	Different effect and color depend on different metal paint (refer to the material sheet)

> Notice：

[1]	The coated surface must be dry and clean without dust, greaze, water, etc.
[2]	Polish and clean the surface to get rid of rust
[3]	Recoat after the previous film is dry
[4]	Make sure the film is not too thick and the solvent is in suitable quantity.
[5]	Use up the prepared mixture within 8 hours, or it gets hard.